SSP Red Speed 98mm Flat Burrs/Blades to fit Mahlkoenig EK43

SSP Red Speed 98mm Flat Burrs/Blades to fit Mahlkoenig EK43

Premium burrset for Mahlkoenig EK43 and EK43s from Korean SSP Grinding Company with 98mm diameter size. This burrset is made using the cast-iron material and has been designed to have different cutting algorithm and geometry compared with the original one. Tested to produce more even, consistent, and uniform coffee ground. This special burrset is coated with Red Speed hard-coating which makes it more longlasting than the original burrset.

What's in the box?

• 1 x Set of SSP Red Speed 98mm Flat Burrs/Blades

About S.S.P

Family owned and operated since 1991, SSP Grinding Solution began as one of the early manufacturers of grinding tools in South KOREA. Today, SSp continues to be a leader in offering an every flat coffee grinding line of high quality cutting tools such as new customized burr sets, and other high performance and specialty tools.

Features

• 98mm Cast-Hardend Iron Tested to last 5,000 kg to 7,000kg
• Installation procedure of SSP coffee grinder burr set.
• Dismount the old burr set following the original grinder manufacturer's instructions,
• Clean the inside of grinder by vacuum or brush for proper alignment of new burrs.
• Coffee powder or any dirties can cause stalling problem and bad alignment after installation.
• Check back side of new SSP burr set (Top / Bottom or Inside/ Outside] for proper installation.
• SSP recommends 3-5 kg course range coffee grinding as 'Seasoning period'.
• Until the edges of the burr are fully covered with coffee oil, grinding speed may be slower than normal.
• SSP recommends grind full city or French roasted bean for 'Seasoning period'.
• It is recommended to be very careful while using espresso setting as it may cause damage to the grinder.